CWC MB5020nw Printer Driver Download & Install

CWC MB5020nw is a multifunction laser printer with network and wireless compatibility. It can print, scan, copy and fax. All these three connectivity (USB, Network and Wireless) are using the same software installer to install this printer. If you are looking for the driver, I am going to provide the driver download link in the download section below and also share its installation guide which is also given beneath the download section. So let’s start the installation process by downloading the drivers first.

Download the CWC MB5020nw Printer Driver

To download the driver, first know the operating system version of your computer, and download the same driver from the below given list.

OR

If you are not comfortable to download the driver from here, alternatively you can download the driver from CWC’s official website, both are the same drivers.

How to Install CWC MB5020nw Printer Driver

In order to install the CWC MB5020nw printer driver on your Windows, you just have to follow the below given step-by-step instructions.

Step 1: Extract the driver file into a folder. If you don’t have this driver you can download it from the above given download link.

Step 2: It will create a folder where it has extracted all the driver files. Open this folder.

Step 3: In this folder, double click on the setup file “CWC BM5020NW printer setup 7.9 .1 .exe” to execute the driver installation wizard.

Step 4: The installation wizard has been started, so please click on next to start the installation process.

Step 5: Click on install.

Step 6: It is extracting and installing the driver file so please wait for that.

Step 7: Please click on install. If you don’t get this message with the install button, then you will have to disable the “driver signature enforcement” option from the startup after that you will get this option. Here’s how to disable the driver signature enforcement options: https://youtu.be/LQKg_VTuZCQ.

Step 8: Please connect the printer’s USB cable to the computer and then click on OK.

Step 9: Click on Finish.

Step 10: The printer has been installed successfully. Connect the printer’s USB cable to the computer and your printer will be ready to print.

So this is how you can install CWC MB5020nw printer driver on your computer. I hope this will be helpful for you. I have shown the steps on a Windows 10 computer but you can apply the same steps on Windows 11 Windows 8 and Windows 7 computers as well by following the same steps.

Specification

As CWC MB5020nw is a laser printer. The power consumption and the toner consumption is very low. It uses only 550 watts in running conditions and uses an economical toner cartridge model number CRG dash 737 / 337.

It is a multi functional printer. You can print, copy, scan and fax through their supported operating system. Its supported operating systems are Windows, Linux and Mac. It comes with build-in processor of 600 MHz and the memory of 256 MB.

The print speed of this printer is also very good 20 PPM and the print resolutions are also very good 1200 DPI maximum. It has two paper trays, one input and one output, the input paper tray can hold 150 pages and the output paper tray can hold 100 pages at a time. There is no duplex feature, so you will have to flip the paper manually to print both sides of the page.

It is not a small printer, the size of the printer is big: 293mm in height, 414mm in depth and 376mm in width. The total weight of this printer is 8.2 KG. There are three connectivity options to connect this printer to the computer: one is USB, second is network, and the third is wireless. All connections are using a single installer to install this printer which I have already given above and also given the step by step installation guide so that you can install this printer easily and properly. So this is all I could gather about the CWC MB5020nw printer information and shared it with you here.