SPRT SP-TL21 Label Printer Driver Download (58MM Thermal Printer)

SPRT SP-TL21 is a thermal printer with USB and Bluetooth connectivity. You can easily connect with your bluetooth enabled device and through the USB. To connect your computer you need to download & install its driver on your computer. You can easily download the driver from the SPRT official website or from the download section given below.

I have given a complete guide on how to install this SPRT SP-TL21 printer a your computer. Please check out the installation section after downloading the drivers. You must know the correct method to install this printer on a computer.

Let’s start the installation process by downloading the drivers first.

Download SPRT SP-TL21 Printer Driver

To download the drivers, determine your operating system version and system type (32bit or 64bit) and then click on the below given download link accordingly.

OR

You may download the SPRT SP-TL21 drivers from the SPRT’s official website.

How to Install SPRT SP-TL21 Printer Driver

In order to install SPRT SP-TL21 printer driver on your computer, you have to follow the below given step-by-step instructions.

Steps:

Step 1: After downloading the driver files, right-click on driver file and click on “Extract to”

Step 2: It will create a folder. Open this folder.

Step 3: Open up the “SP-DRV-TSPL-LABEL(v2.10).exe” file to start installation wizard.

Step 4: Select the checkbox “I agree” and click on Next.

Step 5: Select “TL2X Printer” and click on Next.

Step 6: Select the port: “USB001” from the drop down menu. Then click on install.

Step 7: It is installing the drivers, so please wait.

Step 8: The printer SPRT SP-TL21 has been installed successfully.

That’s it. Hopefully you have also installed SPRT SP-TL21 printer on your computer using the above given instructions. If you find anything incorrect in this article, please let me know in the comments section below.

Specifications:

This printer paints with 203DPI (8dots per mm). The printing speed of this printer is maximum 127 mm per second. The paper support of this printer is 58MM. It uses lots of sensor like print head temperature detector, paper out sensor, paper pickup sensor, lots of sensors are there.

SPRT SP-TL21 It has paper out alarm, black mark detection, overheat protection and buzzer as well. It uses normal thermal paper by 57MM the paper cutting method of this printer is auto peel label printer and you can do it manually as well. So this is the printer specification that I know and that is mentioned in the website. Hope you like it.